Cable Trays
Cable Trays are used as support for laying Power or Control Cables. Two types of Cable trays are in frequent use:
1. Ladder Type Cable Trays
2. Perforated Cable Trays
Ladder Type Cable Trays :
Generally used in applications with intermediate to long support spans 12 to 30 feet.A ladder cable tray without covers permits the maximum free flow of air across the cables. This allows the heat produced in the cable’s conductors to effectively dissipate. Under such conditions, the conductor insulation in the cables of a properly designed cable tray wiring system will not exceed its maximum operating temperature.
The rungs of the ladder cable trays provide convenient anchors for tying down the cables in the non-horizontal cable tray runs or where the positions of the cables must be maintained in the horizontal cable tray runs. This capability is a must for single conductor cable installations. Under fault conditions (short circuit), the magnetic forces produced by the fault current will force the single conductor cables from the cable tray if they are not securely anchored to the cable tray.
Cables may exit or enter the ladder cable trays through the top or the bottom of the cable tray. Where the cables enter or exit conduit, the conduit to cable tray clamps may be installed upright or inverted to terminate conduits on the top or bottom of the cable tray side rail.
The most common rung spacing for ladder cable tray is 9 inches. This spacing may be used to support all sizes of cables.
Perforated Cable Trays:
These are the most common type of cable trays available in market. GI perforated Cable Trays in GP is common whereas the other type, in Hot Dip Galvanised or Powder Coated Cable trays are supplied against order only.
The follwoing are common sizes
1.6 mm thickness - 50X40 mm and 50x25 mm
1.6 mm thickness - 100X40 mm
1.6 mm thickness - 150X40 mm
1.6 mm thickness - 200X40 mm, 225x40mm
1.6 mm thickness - 250X40 mm
1.6 mm thickness - 300x40 mm
1.6 mm thickness - 450mmX50 mm
GI Perforated Cable Tray 150x40x1.6
Minimum Order Quantity: 20 Meter
Product Brochure
Material | Steel |
Usage/Application | cable laying |
Size | 150 mmX40x1.6 mm |
Cable Tray Coating | Pre-Galvanized Metal |
Tray Type | Perforated Cable Tray |
Sheet Thickness | 1.6mm |
Brand | 3E |
Color | GI |
Side Rail Height | 40mm |
Wire Gauge | 16 |
Surface Treatment | perforated |
Length | 2500mm |
These are the most common type of cable trays available for supporting Armoured and Unarmoured cables and provide clean path for cables from source to user. GI perforated Cable Trays supplied with PreGalvanised Sheet also known as GI Sheet and is most common whereas the other type, in Hot Dip Galvanised or Powder Coated Cable trays are supplied against order only.
The perforated cable trays are supplied in standard length of 2.5 meter and is characte
Additional Information:
- Item Code: 7408
- Delivery Time: Ready stock
Perforated Cable Tray
Minimum Order Quantity: 50 Meter
Product Brochure
Width | 50,100,150,200,250,300 mm |
Depth | 40 mm,50 mm,75 mm |
Tray Type | Perforated |
Shape | Capsule |
Is It Foldable | Non Foldable |
Is It Rotatable | Rotatable |
Is It Rust Proof | Rust Proof |
Cable Tray Coating | Galvanized Coating |
Condition | New |
Available Width | 50 mm ~ 900 mm |
Side Coller 40 mm / 50 mm / 75 mmWidth 50 mm, 100 mm, 150 mm, 200 mm, 250 mm, 300 mm, 450 mm, 600 mm??We are Manufacturer of Cable Trays in JaipurSupplier of Cable Trays in JaipurCable Trays Manufacturer in JaipurCable Trays Supplier in Jaipur
Gi Hotdip Cable Tray 300x40x1.6
Minimum Order Quantity: 20 Meter
Product Brochure
Size | 300 mm x 40 mmx 1.6 mm |
Tray Type | Perforated Cable Tray |
Material | Hot Dip |
Cable Tray Coating | Pre-Galvanized, Hot-Dip Galvanized |
Usage/Application | Industrial Outdoor |
Sheet Thickness | 1.6 mm |
Technique | Hot Dip galvanised Cable Trays |
These are the most common type of cable trays available for supporting Armoured and Unarmoured cables and provide clean path for cables from source to user. GI perforated Cable Trays supplied with PreGalvanised Sheet also known as GI Sheet and is most common whereas the other type, in Hot Dip Galvanised or Powder Coated Cable trays are supplied against order only.
The perforated cable trays are supplied in standard length of 2.5 meter.
Heavy Duty Cable Tray
Product Brochure
Size | 500mm to 600mm |
Tray Type | Perforated Cable Tray |
Cable Tray Coating | Galvanized Coating, Pre-Galvanized |
Material | Steel |
Length | 2.5 m |
Thickness | 1.6 mm |
GI Cable Trays 300X40x1.6
Minimum Order Quantity: 50 Meter
Product Brochure
Material | Stainless Steel |
Size | 1000 mm-3000 mm |
Cable Tray Coating | Pre-Galvanized Metal, Galvanized Coating, Hot-dip Galvanized Metal |
Tray Type | Perforated Cable Tray |
Country of Origin | Made in India |
Available Length | 1000 mm-3000 mm |
Additional Information:
- Production Capacity: 1000 meter per week
- Delivery Time: Ready Stock
- Packaging Details: Open
Cable Trays
Product Brochure
Tray Type | Ladder Type Cable Tray |
Material | Aluminum |
Shape | Rectangular |
Usage/Application | Industrial |
Cable Tray Coating | Galvanized Coating |
Brand | 3e Solutions |
Gi Cable Tray
Minimum Order Quantity: 50 Meter
Product Brochure
Tray Type | Perforated Cable Tray |
Material | Mild steel - GI Coated |
Cable Tray Coating | Galvanized Coating |
Size | Customisable |
Brand | 3E Solutions |
Usage/Application | Routing of Cable Trays |
Grade | Industrial |
Additional Information:
- Production Capacity: 1000 meter per week
- Delivery Time: 1 week
- Packaging Details: Loose
Cable Raceways
Product Brochure
Mounting | Overhead |
Tray Type | Perforated Cable Tray |
Usage/Application | Commercial |
I Deal In | New Only |
Brand | 3E |
Raw Materials | GI sheet |
Product Type | Cable Trays |
Surface | Zinc Coated |
Coating | 40 Micron |
Temperature | NR |
Finishing | GI |
Material Grade | Pre Galvanised Iron |
Shape | U Type |
Color | Silver Colour |
Length | 2500 mm |
Depth | 50 mm |
Width | 300 mm |
Material | GI |
Country of Origin | Made in India |
Mild Steel Cable Tray
Product Brochure
Tray Type | Perforated Cable Tray |
Brand | 3e Solutions |
Material | Mild Steel |
Usage/Application | Industrial |
Cable Tray Coating | Galvanized Coating, Pre-Galvanized Metal |
Height | 25 mm To 200 mm |
Galvanized Cable Trays
Product Brochure
Shape | Rectangular |
Usage/Application | Industrial |
Cable Tray Coating | Galvanized Coating |
Material | Steel |
Tray Type | Perforated Cable Tray |
Feature | Corrosion Resistance |
Stainless Steel Cable Trays
Product Brochure
Cable Tray Coating | Galvanized Coating |
Tray Type | Ladder Type Cable Tray |
Shape | U |
Material | Stainless Steel |
Usage/Application | Industrial |
Country of Origin | Made in India |
Weight | 40 Kg |
G.I raceway
Product Brochure
Mounting | Wall/Desk |
Tray Type | Perforated Cable Tray |
Usage/Application | Industrial |
Material | Aluminum |
Brand | 3e Solutions |
Country of Origin | Made in India |
Gi Ladder Type Cable Tray
Product Brochure
1. Chemical Earthing : 3E Solutions is synonymous to Earthing in Jaipur. Known for Quality and Solutions provider, 3E provide all types of Electrical Safety Solutions. 3E make Chemical Earthing Electrodes tailored to the need of installations. Earlier, Salt Charcoal based conventional earthings were in practice. However due to threat of corroison by Salt and also leachability, the stable life of conventional earthing is considered much less. In place, now a days Gel Earthing or Chemical Earthing is used where Chemical Earth Electrodes or Gel Earthing Electrodes not only have stable electrical performance, but also better life. Further, the life of Earth Electrodes depends upon the quality of Hot Dip Galvanised GI Pipes and thickness of GI Pipe. 3E Solutions is the best Chemical Earthing Electrodes manufacurer in Jaipur supplying best Earthing Solutions in Jaipur.
2. Cable Trays : Cable trays are used to give path to armoured and unarmoured cables in industries and commercial installations. Perforated Cable trays are more in use due to its economy, ease in installation and availability. 3E Solutions manufacture GI perforated cable trays and GI Raceways.
3. Lightning Protection System : The conventional Lightning protection has disadvantage of low protection range. The ESE Lightning rods catch the lightning ladder in sky approx 15ms, 30 ms, 45 ms or 60 ms ( milliseconds ) before lightning actually hits the building. We supply Eurostar, Topbas and LPI type ESE Lightning protection system.
We serve :
1. We do complete energy audit of industries, commercial installations and buildings for identification of loss of energy and in other words, loss of money. We audit HVAC ( Chiller, Cooling Towers), Lighting, Heat, Steam and wastes of electrical enerrgy. We identify energy savings projects with calculation of ROI and payback period. Upon successful implementation of such projects, the customer not only save money, but also help to save the environment.
2. Electrical Safety Audit : Identify the areas where electrical risks can be reduced. We also do complete thermography of panels, load distributions, harmonic content of loads and effect on crucial equipments.
3. Earthing Testing : We test the earth pits with instruments issue give certificate for correct radings for multiple earthings.
4. Electrical Consultancy : We undertake the complete MEP consultancy covering all the areas i.e. HVAC, Fire Fighting, Electrical and Mechanical. The engineers in Tema are upto 25 years experience in industries.
5. Project Management : We undertake the monitoring of entire project for its timely completion as per the agreed norms.